About Vaping with the FlowerPot
In an eort to achieve the best experience with the FlowerPot we ask that
our customers familiarize themselves with the following key points.
Use a Fine Grind: The finer the grind, the denser the clouds and hap-
pier the patient. We have made a special 2 piece grinder to achieve this fine
grind. Multi Level grinders don’t produce a fine enough grind. The arm band
grinder can be customized with any 3” by ½” armband. It should be cleaned
weekly with hot dish soap and a firm bristle brush. The importance of fine
grind can also be realized by comparing coee to espresso where the dif-
ference is mostly in the fineness of the grind. Not all vaporizers can handle
extra fine material. The titanium screen used in the flowerpot bowl has been
custom made for this application.
Initial Heat Up Time: The Flowerpot requires 3-5 min to get to tem-
perature. In the beginning please allow a full 5 minutes for the head to com-
pletely heat soak. Once the Flowerpot is hot it can remain safely parked on
the stand for hours. Most customers (including me) leave theirs on all day.
Please allow 5 min for any temp adjustments to normalize.
Draw Speed/Lung Capacity: The faster the air goes thru the flowerpot
head the less hot it will be when it hits the material. Resulting in reduced /
poor vapor production. We suggest a slow to medium draw speed for ideal
vapor. This technique will take you a couple of days to perfect. The ultimate
goal is to vaporize the material to the edge of combustion with no coughing.
Please remember the AVB (Already Vaped Bud) can be used to make some
amazing edibles so don’t throw that away.
On Demand Vape: The secret sauce of the flowerpot is it’s ability to
deliver a traditional bong rip without combustion. The traditional bong rip
with a bic lighter is the ultimate “on demand” experience. We have designed
the flowerpot with this traditional bong rip experience in mind. Add the heat
only when you’re drawing in. Just like you would with a lighter. Place the
heated head back on the safety stand between draws.
Open Eco System: The flowerpot vaporizer system is designed to be
compatible with all standard glass pipes. This open architecture design of
the flowerpot is intended to allow customers to go out and collect dier-
ent glass pipes without worrying about compatibility. Each time a dierent
glass pipe is used it’s like having a brand new vape. The electronics are also
based around a industry standard 20mm enail. Nothing proprietary.
To Next Page
Loading...