Nexa ZRT-106 User Manual

ZRT-106
Thermostatic Radiator Valve
Thermostatic Radiator Valves (TRVs) sense the air temperature around them and regulate the flow of
water through the radiator which they are fitted to.
They can be set at a level that gives you the room temperature you want. These settings may have to be
different in each room, and you can set the TRVs to suit each room and then leave them to do their job.
The device can be set temperature by manual or by gateway and schedule are created by gateway.
This product can be operated in any Z-Wave
TM
network with other Z-Wave certified devices from other
manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to
increase reliability of the network.
Product Overview
LCD Display
Installation
Mounting
Do not insert the batteries yet.
1. Remove any existing control from the radiator valve
2. Mount the TRV on the valve and tighten it by turning the Valve cap clockwise.
3. You may need to use one of the adaptors supplied to fit your radiator valve:
Button name
Function
1.
P button
For RF inclusion
2.
Power on/off
Turn on/off TRV
3.
M button
Mode select : HEAT/ ENERGY HEAT
4.
Down button
Reduce Target Temperature
5.
Up button
Increase Target Temperature
Battery
cover
LCD
display
Valve
cap
Time
4
1
2
3
5
Week
Temperature display
Key lock
ENERGY HEAT Mode
ROOM: Current
temperature
SET: Target
temperature
HEAT Mode
Heating active

Nexa ZRT-106 Specifications

General

Brand	Nexa
Model	ZRT-106
Category	Thermostat
Language	English