Do not touch the device, power adaptor, or USB
cable with wet hands. Keep this product dry.
Do not exceed the power requirements of this prod.
If the unit is damaged, please exercise the warranty
or recycle the webcam at your nearest electronics
store. Do not attempt to repair, disassemble, or
modify the webcam under any circumstance. Contact
NexiGo Customer Support if there is an issue to
exercise the warranty.
To clean the device, wipe it with a soft, dry cloth. To
clean the lens, use a dry microfiber cloth or a lens
cleaner. Use only a mild detergent if necessary. Do not
use strong or corrosive detergents to avoid damaging
the lens.
Keep ventilation openings free from any
obstructions.
Please protect the USB cable. Do not step on or
apply pressure on them. Do not pull on the product's
plug, socket, or cable outlet.
When not using the webcam, please unplug the
device from the USB port and turned off the power.
US 02EN 02
To Next Page
Loading...
