Need help?Do you have a question about the Next Level Racing GT SEAT ADD ON and is the answer not in the manual?
Attach the motion platform to the side brackets using the specified bolts and washers.
Bolt the rear plate to the side brackets using the specified bolts and washers.
Attach the seat to the motion V3 using the specified bolts and washers.
Attach the motion shifter arm using the specified bolts and washers.
Assemble the shifter plate, including the hand brake plate, using the specified bolts, washers, and nuts.
Attach the assembled shifter plate to the motion arm using the specified bolts, washers, and nuts.
Attach the seat to the frame using the specified M8 bolts and washers.
Attach the back plate to the frame using the specified M8 bolts and washers.
Screw the feet into the frame as indicated in the diagram.
Bolt the shifter arm to the frame using the specified M8 bolts, washers, nuts, and spike washers.
Bolt the shifter plate to the arm using the specified M8 bolts, washers, nuts, and spike washers.
Bolt the handbrake plate to the shifter plate using the specified M8 bolts, washers, nuts, and spike washers.
Mount the butt kicker pole to the subframe using the specified M8 bolts, washers, and nuts.
Connect the assembled seat to the Wheel Stand DD or Wheel Stand 2.0.
Attach with supplied bolts according to the specifications for WSDD or WS 2.0.
Secure the structure with angled bolts, repeating on the other side as shown.
Place plastic caps over the bolt holes for a finished look.
General| Brand | Next Level Racing |
|---|---|
| Model | GT SEAT ADD ON |
| Category | Indoor Furnishing |
| Language | English |
To Next Page
