6
4.
Connect all battery packs as below chart. It’s suggested to connect at least 100Ah capacity
battery for
3KW model and at
least 200Ah capacity battery
for
5KW model .
5. Insert the battery wires flatly into battery connectors of inverter and make sure the bolts are tightened with
torque of 2 Nm in clockwise direction. Make sure polarity at both the battery and the inverter/charge is
correctly connected and conductors are tightly screwed into the battery terminals.
Recommended tool: #2 Pozi Screwdriver
6. To firmly secure wire connection, you may fix the wires to strain relief with cable tie.
To Next Page
Loading...