DRIVING RECORDER PLAYER - CONTROLS
1. Playback window of selected video file
Displays selected video file video.
2. Date / Time / Speed Stamp
Data saved to the recorded file, this content may vary depending on iN-CAR CAM settings and
GPS signal.
3. G Sensor data
Displays the current data for the three axis, X = left/right, Y = forwards/backwards, Z = up/down.
The three axis are colour coded for easy identification.
4. G Sensor graph
Displays the recorded G Sensor data for current file as a graph.
The three axis are colour coded for easy identification.
5. File Details window
File Name:
Seconds:
Longitude:
Latitude:
Speed:
The key below explains the various information displayed within the Driving Recorder Player when
using a Windows platform.
11/09/2013 13:31:55 65.0MPH
Driving Recorder Player MPH Software (V2.0)
1
2
3
4
5
6
7 8 9 10
11
12
13
24
Displays the file name for video being viewed.
Data refreshes each second, current position within video being viewed is
shown here by the second.
Displays current longitude co-ordinates as a decimal number.
Displays current latitude co-ordinates as a decimal number.
Displays current speed.
To Next Page
Loading...