EasyManua.ls Logo

Nexus 1000 - Completing Frame Assembly

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Assembly Instructions Cont.
7. Hi/LowshaftconnectedtoHi/Lowmotor.
9. Installthecastersbyinsertingthe
stemofthecasterintotheleg
receptacle.Itisrecommendedto
install1lockingcasterand1non-
lockingcasteroneachbedend.
Thelockingcastersshouldbe
installeddiagonallyfromeachother.
8. Connectheadsectionandfootsection
bysqueezingtogetherandattaching
withspringlinks.Pullupthehead
sectionandfootsectiontorelease
tensionbetweenthesprings.
StemLegReceptacle