Need help?Do you have a question about the Nexus NX2500 and is the answer not in the manual?
General| Brand | Nexus |
|---|---|
| Model | NX2500 |
| Category | Marine Radio |
| Language | English |
Rules for call priority, monitoring Channel 16, and distress call prohibition.
Rules regarding overheard information and prohibited language.
Requirements for ship station and operator licenses.
Details the buttons, controls, and display elements on the front of the unit.
Describes the connection ports and features on the rear of the NX2500 unit.
Explains the various indicators and symbols displayed on the Liquid Crystal Display.
Details the function of the numeric keypad for data entry and character selection.
Enables monitoring of selected and priority channels simultaneously.
Scans through channels sequentially until a signal is detected.
Scans only channels entered into the memory.
Allows tagging or untagging channels for memory scan selection.
Adjusts the receiver's muting threshold to filter noise.
Adjusts the audio output volume level.
Quickly selects Channel 16 for emergency communication.
Navigates through available VHF channels using up/down keys.
Switches between high and low transmit power output.
Prevents continuous transmissions exceeding a set duration.
Describes receiving and responding to a distress alert call.
Details receiving and responding to a routine DSC call.
Explains receiving and responding to safety or urgency DSC calls.
Describes receiving and responding to a group DSC call.
Details receiving and responding to a distress relay call.
Explains receiving and responding to a Sea Call.
Instructions for initiating and sending a distress call.
Instructions for initiating and sending a routine DSC call.
Instructions for initiating and sending a safety DSC call.
Instructions for initiating and sending an urgency DSC call.
Instructions for initiating and sending a group DSC call.
Instructions for initiating and sending a distress relay DSC call.
How to view the log of received routine calls.
How to view the log of received distress calls.
How to enter and verify the vessel's Maritime Mobile Service Identity (MMSI).
Procedure for setting up Group IDs for fleet communication.
Manually inputting vessel position and UTC time if GPS is unavailable.
Managing the contact directory for storing vessel information.
Adjusting the brightness level of the LCD backlight.
Adjusting the contrast level of the LCD display.
Selecting internal, external, or both speaker outputs.
Enabling or disabling audible feedback for key presses and alerts.
Setting the radio to Navtex-only mode for nighttime operation.
Setting the current date and time on the unit.
Viewing received Navtex messages and selecting specific ones.
Selecting which Navtex stations to monitor or ignore.
Filtering and selecting specific types of Navtex messages.
Deleting all stored Navtex messages from the unit.
Deleting specific Navtex messages from memory.
Viewing GPS data, vessel position, and waypoint information.
Detailed technical specifications for the radio receiver.
Specifications for monitoring Channel 70.
Detailed technical specifications for the radio transmitter.
Technical details regarding the Navtex functionality.
Technical details concerning the GPS input format.
Guidelines and recommendations for physically installing the NX2500 unit.
Advice on optimal antenna placement and connection for best performance.
To Next Page
