Nexxt Solutions Smart Wi-Fi IR/RF - Step 3: Learn Individual Buttons; Step 4: Name and Save Remote

Step 3
Place the remote control you want to match no more than
2 inches apart from the IR/RF universal control. Click on the
plus (+) sign, to add buttons one by one. For example, if
you want to add a TV set, click on a button in the TV control
for the IR/RF universal control to detect the IR signal. Once
detected, the app will show the message Learning
Succeed. Then, name the button and click on Save to add
the button to the TV remote control in the app. When
nished adding buttons, click on Finish on the top right
corner to end the process.
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
60 %
9:41 AM
Step 4
Finally, give the device a name entering its type, brand and
model.
60 %
9:41 AM
60 %
9:41 AM