Need help?Do you have a question about the nfortec CAELUM and is the answer not in the manual?
General| Model | CAELUM |
|---|---|
| Type | Mid Tower |
| Motherboard Compatibility | ATX, Micro-ATX, Mini-ITX |
| Material | Steel, Tempered Glass |
| Expansion Slots | 7 |
| I/O Panel | 2 x USB 3.0, 1 x USB 2.0, Audio In/Out |
| Fan Support Front | 3 x 120 mm / 2 x 140 mm |
| Fan Support Rear | 1 x 120 mm |
| Radiator Support Front | Up to 360 mm |
| Radiator Support Top | Up to 280 mm |
| Radiator Support Rear | Up to 120 mm |
| CPU Cooler Height | 160 mm |
| Weight | 7.5 kg |
| Color | Black |
| Drive Bays | 2 x 3.5" |
| Fan Support Top | 2 x 120 mm |
| Included Fans | 1 x 120mm |
Instructions for safely removing the side panel and front panel for access.
Guide on how to correctly install the power supply unit (PSU) into the case.
Procedure for mounting the motherboard, including installing standoffs and aligning the board.
Instructions for installing Hard Disk Drives (HDD) and Solid State Drives (SSD) into the designated bays.
Steps for installing graphics cards and other expansion cards into the PCI slots.
Guidance on installing cooling fans and radiators, specifying sizes and locations.
To Next Page