Need help?Do you have a question about the NI NHR 4808-16 and is the answer not in the manual?
General| Number of Channels/Outputs | 16 |
|---|---|
| Output Voltage Range | 0 to 60 V |
| Output Current Range | 0 to 8 A |
| Ripple and Noise (Current) | < 10 mArms |
| Voltage Resolution | 1 mV |
| Current Resolution | 1 mA |
| Communication Interface | Ethernet, USB, GPIB |
| Operating Temperature | 0 to 40 °C |
| Storage Temperature | -20 to 70 °C |
Provides a comprehensive overview of the module's features and capabilities.
Explains warning icons and module-specific safety notices.
Details warranty terms, limitations, and specifies intended laboratory use.
Covers essential safety precautions and defines key terms used in the manual.
Introduces the product as a leading bi-directional power solution.
Highlights core functionalities like contactors and protection circuits.
Illustrates front, rear, and interior views of the module and enclosure.
Explains the module's power stages and operational theory.
Covers Emergency Stop, User Interlock, Trip Limits, and Internal Monitoring.
Details DC output ratings and amplifier mode specifications.
Provides accuracy, resolution, and range for measurements.
Covers isolation, physical dimensions, environmental, and input power specs.
Describes the module's control interfaces for system integration.
Guides on safely unpacking and handling the module.
Specifies requirements for module placement and airflow.
Provides guidelines for electrical connections and breaker sizing.
Step-by-step instructions for connecting the AC power source.
Guides on securely connecting the Unit Under Test (UUT).
Instructions for establishing network connectivity.
Details wiring for safety interlock and emergency stop functions.
Instructions for proper termination of the parallel interface.
Provides a checklist for safe system power-up and shutdown.
Detailed procedures for system start-up and shutdown.
Describes touch panel, status indicators, and various module interfaces.
How to use the touch panel and select operating modes.
Navigating the setup wizard and understanding on-screen controls.
Demonstrates setting current flow and limits in Standard Mode.
Explains how to use physical controls during module operation.
Details settings for Overview, Network, Safety Limits, and more.
Covers module cleaning, touch panel care, and maintenance schedules.
Information on calibration procedures and programmer references.
Information on support resources, calibration, repair, and registration.
To Next Page