Nibe EME 20 - System Outline and Electrical Connection (F-Series); Outline Diagram; Connecting Communication Cables (F-Series); Cable Lock Mechanism (F-Series)

Outline diagram
OUTLINE DIAGRAM, CONNECTION EME 20
LEK
LEK
4 5
3
2
HB
I
JF
JF
HB 2
11
H1
I
B
5L
1
6
7 8 9
1
0 11
2
TR
H
K
AIA 566
LEK
L
E
K
LEK
Internet
U
N
Solar panels
Inverter
Electrical
distribution unit
Energy meter
Net owner
NIBE Uplink
Heat pump/indoor module or
control module
EME 20
Own use
domestic electricity
Energy meter
own consumption
(optional)
Electrical connection
CONNECTING COMMUNICATION
NOTE
All electrical connections must be carried out
by an authorised electrician.
Electrical installation and wiring must be carried
out in accordance with the stipulations in force.
The heat pump must not be powered when
installing EME 20.
• To prevent interference, sensor cables to external
connections must not be laid close to high voltage
cables.
• The minimum area of communication and sensor
cables to external connections must be 0.5 mm² up
to 50 m, for example EKKX, LiYY or equivalent.
• EME 20 restarts after a power failure.
CABLE LOCK
Use a suitable tool to release/lock cables in terminal
blocks.
LEK
1
1
2
2
3
3
1
2
3
3
4
1
2
LEK
1
1
2
2
3
3
1
2
3
3
4
1
2
1
2
35EME 20 F-series | GB
F