Nibe RMU S40 - Installation with Rear Panel

INSTALLATION WITH REAR PANEL
1.
Screw the rear panel onto the wall using 2 screws.
Use screws (and any plugs) suitable for the wall
material.
UN
2.
Connect RMU S40 to the main product, see section
Compatible products.
UN
3.
Angle the display unit and secure the unit to the two
clamps at the bottom of the rear panel.
UN
4.
Press RMU S40 firmly to the top of the rear panel.
UN
NIBE RMU S40 | GB26