Nibe SMO 20 - Page 3

USER GUIDE
3
evoecohomes.co.uk
Heating
Select ‘Indoor Climate’ by pressing ‘OK’ from the Main Menu.
N.B. After resetting temperature please wait 24 hours for room temperature
to stabilise before changing settings again.
To change the room temperature, use the control knob to set a new value.
Conrm the new setting by pressing the OK button.
For systems that are controlled by a room sensor, the value in the display
appears as a temperture in °C:
Setting range: 5°C - 30°C
Setting range: -10 to +10
Default value: 0
Default Value: 20°C
To change the room temperature, use the control knob to set the desired
temperature in the display. Conrm new temperature by pressing “OK”.
Setting Hot Water Capacity
To set the hot water capacity, from the main menu scroll down to the “HOT
WATER” option and press “OK”.