EasyManua.ls Logo

Nibe SMO 20 - Safety Information; General Safety Precautions; Understanding Warning Symbols

Nibe SMO 20
9 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
USER GUIDE
5
evoecohomes.co.uk
Smart ControlSmart Control: N/A
EconomyEconomy: This mode produces less hot water, but is more economical.
This mode is useful in smaller households with a small hot water
requirement. Heats your hot water to 48°C and reheats
when the temperature drops to 42°C.
NormalNormal: This gives more hot water than economy mode, and is suitable
for most households. Heats your hot water to 50°C and reheats when the
temperature drops to 46°C.
LuxuryLuxury: This produces the greatest possible amount of hot water. The
compressor and immersion heater are used in this mode, which may
incur higher operating costs. Heats your hot water to 50°C and reheats
when the temperature drops to 49°C.
Highlight the comfort level you require, select OK. This is now selected.
Press ‘Back’ twice to return to the Main Menu.
Scheduling Heating
Our recommendation is to leave your heating system in comfort mode
instead of setting a scheduling time. The heat pump is designed to produce
and sustain heat throughout the day, compared to traditional heating
systems that emit large volumes of heat at set times of day to heat your
home quickly but ineciently.
Should you wish to set, for example, a nighttime schedule, there are a few
things to consider:
For a night time schedule, we would recommend only reducing the
nighttime temperature by 3°C. For example, if you like your room
temperature to be at 20°C during the day, we would recommend setting
a night time schedule of 17°C. Set this any lower and you may nd your
house is too cold to wake up to!
Also remember, the schedule will tell the system when to initiate the set
temperature, please allow time for the system to reach this temperature.
E.g. if you want your system to revert back to 20°C for 7am, you may wish
to set the schedule to initiate at 6am, to allow the system to achieve your
desired temperature of 20°C by 7am.

Other manuals for Nibe SMO 20

Related product manuals