Nibe SMO 20 - Using the Virtual Keyboard; Text Input Method

Accessibility, electrical
connection
The cover of the control module is opened using a Torx
25 screwdriver. Assembly takes place in the reverse
order.
3
1
2
LEK
LEK
TIP
The cover to access the base board is opened
using a Torx 25 screwdriver.
3
1
2
LEK
LEK
The display may need to be moved for easier access
when connecting electrics. This is easily done by follow-
ing these steps.
1.
LEK LEK LEK LEK
b
a
Press in the catch on the upper rear side of the dis-
play unit towards you (a) and move the display unit
upwards (b) so that the mountings unhook from the
panel.
2.
LEK LEK LEK LEK
b
a
Lift the display unit from its mountings.
3.
LEK LEK LEK LEK
b
a
Align the two lower mountings on the reverse of
the display unit with the two upper holes in the
panel as illustrated.
NIBE SMO 20Chapter 5 | Electrical connections18