Nibe SMO 20 - Quick Guide; Navigation Basics; Setting Indoor Climate

Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page 31.
How to scroll through menus and make different settings is described on page 33.
temperature1.1
Set the indoor climate
2X
INDOOR CLIMATE
HOT WATER
INFO
HEAT PUMP
The mode for setting the indoor temperature is accessed by pressing the OK button twice, when in the start
mode in the main menu.
INDOOR CLIMATE
HOT WATER
INFO
HEAT PUMP
off
temporary lux2.1
3 hrs
6 hrs
12 hrs
one time
increase
Increase hot water volume
2X
1X
To temporarily increase the amount of hot water (if a hot water heater is installed to your SMO 20), first turn
the control knob to mark menu 2 (water droplet) and then press the OK button twice.