Nibe SMO 20 - Control Module Interface; Display Information; Control Buttons and Knob

■
see different types of alarms and receive instructions about how they
are to be rectified.
Display
Instructions, settings and operational information are shown on the
display. You can easily navigate between the different menus and
options to set the comfort or obtain the information you require.
A
Status lamp
The status lamp indicates the status of the control module. It:
■
lights green during normal operation.
■
lights yellow in emergency mode.
■
lights red in the event of a deployed alarm.
B
OK button
The OK button is used to:
■
confirm selections of sub menus/options/set values/page in the
start guide.
C
Back button
The back button is used to:
■
go back to the previous menu.
■
change a setting that has not been confirmed.
D
Control knob
The control knob can be turned to the right or left. You can:
■
scroll in menus and between options.
■
increase and decrease the values.
■
change page in multiple page instructions (for example help text
and service info).
E
11NIBE™ SMO 20Chapter 2 | The control module – the heart of the house