Nibe SMO 20 - Quick Guide; Navigation Basics; Setting Indoor Climate

Quick guide
Navigation
Ok button (confirm/select)
Back button (back/undo/exit)
Control knob (move/increase/reduce)
A detailed explanation of the button functions can be found on page
10.
How to scroll through menus and make different settings is described
on page 15.
temperature1.1
Set the indoor climate
2X
INDOOR CLIMATE
HOT WATER
INFO
HEAT PUMP
The mode for setting the indoor temperature is accessed by pressing
the OK button twice, when in the start mode in the main menu. Read
more about the settings on page 23.
INDOOR CLIMATE
HOT WATER
INFO
HEAT PUMP
off
temporary lux2.1
3 hrs
6 hrs
12 hrs
one time
increase
Increase hot water volume
2X
1X
To temporarily increase the amount of hot water (if a hot water heater
is installed to your SMO 20), first turn the control knob to mark menu
2 (water droplet) and then press the OK button twice. Read more about
the settings on page 39.
In event of disturbances in comfort
If a disturbance in comfort of any type occurs there are some measures
that can be taken before you need to contact your installer. See page
64 for instructions.