Two different periods of hot water
comfort per day can be scheduled
here.
Scheduling is activated/deactivated by
ticking/unticking"activated". Set times
are not affected at deactivation.
Schedule: The schedule to be changed
is selected here.
Activated: Scheduling for the selected
period is activated here. Set times are
not affected at deactivation.
Day: Select which day or days of the
week the schedule is to apply to here.
To remove the scheduling for a particular day, the time for that day must
be reset by setting the start time to the same as the stop time. If the line
"all" is used, all days in the period are set for these times.
Menu
2.3
Time period: The start and stop time for the selected day for scheduling
are selected here.
Adjusting: Set the hot water comfort that is to apply during scheduling
here.
Conflict: If two settings conflict with each other a red exclamation mark
is displayed.
TIP
If you wish to set similar scheduling for every day of the week start by
filling in “all” and then changing the desired days.
TIP
Set the stop time earlier than the start time so that the period extends
beyond midnight. Scheduling then stops at the set stop time the day
after.
Scheduling always starts on the date that the start time is set for.
41NIBE™ SMO 20Chapter 3 | SMO 20 – at your service
To Next Page
Loading...
