Nibe SMO 20 - Hot Water Circulation; Circulation Pump Operation

hot water recirc.
hot water recirc.2.9.2
operating time
downtime min
min
period1
period2
period3
operating time
Setting range: 1 - 60 min
Default value: 60 min
downtime
Setting range: 0 - 60 min
Default value: 0 min
Menu
2.9.2
Set the hot water circulation for up to three periods per day here. During
the set periods the hot water circulation pump will run according to the
settings above.
"operating time" decide how long the hot water circulation pump must
run per operating instance.
"downtime" decide how long the hot water circulation pump must be
stationary between operating instances.
Hot water circulation is activated in menu 5.4 "soft inputs and outputs".
43NIBE™ SMO 20Chapter 3 | SMO 20 – at your service