Nibe SMO S40 - 1 Important Information; Installation Data

Installation data
SMO S40Product
Serial number
Installation date
Installer
Heat pump 1 – 4
Heat pump 5 – 8
SetDefault set-
tings
NameNo.
9Curve, heating (offset)1.30.1
0Curve, cooling (offset)1.30.2
Own curve (curve slope)1.30.7
Accessories
SERIAL NUMBER MUST ALWAYS BE GIVEN
It is hereby certified that the installation has been carried out according to instructions in the Installer Manual from
NIBE and applicable regulations.
Date __________________________________________
Signature ____________________________________________________________________________
NIBE SMO S40Chapter 1 | Important information4
1 Important information