Nice Tech 4SE - Rollator Operations; Opening and Folding; Adjusting Handgrips

• After unhooking the fixing hook from the supporting
pipe, Make sure that the rollator is to be fully
extended to the side. Then, push the seat support
pipe down slightly until you hear the ‘click’ sound.
• Make sure that all 4 wheels contact with the floor
and the rollator is stable in the open position.
• Pull up the seat holder slightly and fold it.
• Fix the rollator by using fixing hook, as you see the
picture.
OPENING THE ROLLATOR
FOLDING THE ROLLATOR
4SE4SE
• After opening the rollator, please be advised that both handgrips are adjustable in height at the user's preference.
To adjust the height of handgrips, remove the height adjustment nuts under the handgrips. Then, slide the
handgrips up or down until they are at the proper height and screw the height adjustment nuts to the frame.
Make sure that all nuts are fully tightened and not moving from side to side. The both heights should be equal.
ADJUSTING THE POSITION OF THE HANDGRIPS
4SE
4 NICE WALKER - High-tech walking aid for better life
Seat Holder
Fixing Hook
Height Adjustment Nut Small Round Button