To Next PageTo Next Page
Need help?Do you have a question about the NICHIYU 80 Series and is the answer not in the manual?
Provides critical instructions on how to survive a forklift tip-over incident safely.
Lists general safety guidelines to follow during forklift operation to prevent accidents.
Provides essential safety rules regarding operator conduct, environmental hazards, and truck conditions.
Emphasizes daily checks and reporting any damages or faults before operation.
Warns against overloading the forklift and advises checking load charts for safe operation.
Advises operators to be aware of people and tail swing hazards during turns.
Warns against sudden starts, stops, or turns which can destabilize the truck.
Guides on avoiding obstacles, curbs, and uneven/slippery grounds to prevent tip-overs.
Prohibits traveling with forks raised and specifies proper traveling height and mast tilt.
Instructs against pushing/dragging loads, lifting by fork tips, or using loose chains/hoses.
Prohibits people from walking or standing under raised forks or riding on the truck.
Details safe practices for traveling on grades and avoiding turns on inclines.
Warns against off-center loads and putting body parts into mast structure or climbing on mast.
Stresses keeping body inside compartment, operating levers slowly, and proper load stabilization.
Prohibits jumping on/off the truck and picking loads beyond backrest extension height.
Details how to fasten and adjust the seat belt for safe operation.
Explains the causes of lateral and longitudinal tip-overs and risks to the operator.
Provides crucial instructions on how to position and brace oneself during a tip-over incident.
Provides instructions on how to correctly fasten and release the seat belt.
Explains the function of the emergency stop switch and its proper usage.
Lists crucial safety precautions for using the laser pointer, including focus and beam exposure.
Warns against disassembling, modifying, or adjusting the laser pointer unit.
Provides step-by-step instructions for performing stacking operations safely.
Guides on correctly placing and aligning loads during stacking operations.
Outlines the steps for safely picking up loads from a pallet.
Details the final steps of picking a load and positioning forks for travel.
Emphasizes precautions to prevent fires and explosions when handling batteries.
Warns about the high voltage of batteries and precautions against electric shock.
Advises caution when handling battery electrolyte, which is sulfuric acid.
Outlines first aid measures for contact with battery acid and other accidents.
General