Nidec COMMANDER S100 - Safety Information; Important Safety Information; Electrical and Mechanical Hazards

Commander S100 Step by Step Guide 4
Table 1-4 Fuse, MCB and Cable Selection
Cables marked † need to be rated for 90 °C and 1.5 mm
2
in order to terminate with a ferrule.
Cables marked †† need to be rated for 90 °C and 4 mm
2
in order to terminate with a ferrule.
Integral solid state short circuit protection does not provide branch circuit protection. Branch circuit protection must be
provided in accordance with the National Electrical Code and any additional local codes.
Model
Number
Rated
Current
Rated
Power
Supply
Phases
Max
Input
Current
IEC UL
Cables for
IEC60364-5-52
Cables for
UL61800-5-1
Fuses MCB Fuses MCB Supply Motor Supply Motor
AkWhp A A A
mm
2
AWG
100 V Drives (100 to 120 V ±10 %)
S100-01113 1.2 0.18 0.25 1 7.2 10 10 10 15 1.5 1.5 24 24
S100-01123 1.4 0.25 0.33 1 8.5 10 10 15 15 1.5 1.5 24 24
S100-01133 2.2 0.37 0.5 1 10.4 12 12 15 15 1.5 1.5 22 22
S100-03113 3.2 0.55 0.75 1 14.8 16 16 20 25 2.5 1.5 20 20
S100-03123 4.2 0.75 1 1 20.0 25 25 30 25 2.5 1.5 18 18
S100-03133 6 1.1 1.5 1 28.5 32 32 40 40 6†† 1.5 16 16
200 V Drives (200 to 240 V ±10 %)
S100-01S13 1.4 0.18 0.25 1 3.3 6 6 6 15 1.5 1.5 24 24
S100-01213 1.4 0.18 0.25 3 2.0 4 6 6 15 1.5 1.5 24 24
S100-02S11 1.2 0.18 0.25 1 3.3 6 6 6 15 1.5 1.5 24 24
S100-01S23 1.6 0.25 0.33 1 3.8 6 6 6 15 1.5 1.5 24 24
S100-01223 1.6 0.25 0.33 3 2.3 4 6 6 15 1.5 1.5 24 24
S100-02S21 1.4 0.25 0.33 1 3.8 6 6 6 15 1.5 1.5 24 24
S100-01S33 2.4 0.37 0.5 1 4.7 6 6 6 15 1.5 1.5 22 22
S100-01233 2.4 0.37 0.5 3 2.8 4 6 6 15 1.5 1.5 22 22
S100-02S31 2.2 0.37 0.5 1 4.7 6 6 6 15 1.5 1.5 22 22
S100-01S43 3.5 0.55 0.75 1 8.0 10 10 10 15 1.5 1.5 20 20
S100-01243 3.5 0.55 0.75 3 4.7 6 6 6 15 1.5 1.5 20 20
S100-02S41 3.2 0.55 0.75 1 8.0 10 10 10 15 1.5 1.5 20 20
S100-01S53 4.6 0.75 1 1 9.5 12 12 15 15 1.5 1.5 18 18
S100-01253 4.6 0.75 1 3 5.7 8 8 10 15 1.5 1.5 18 18
S100-02S51 4.2 0.75 1 1 9.5 12 12 15 15 1.5 1.5 18 18
S100-01D63 6.6 1.1 1.5
1 15.3 16 20 20 20 2.5† 1.5 16 16
3 12.2 16 16 15 15 1.5
1.5
16 16
S100-02S61 6 1.1 1.5 1 15.3 16 20 20 20 2.5† 1.5 16 16
S100-01D73 7.5 1.5 2
1 18.4 20 25 25 20 2.5† 1.5 16 14
3
14.3 16 16 20 20
2.5† 1.5
16 14
S100-02S71 6.8 1.5 2 1 18.4 20 25 25 20 2.5† 1.5 16 14
S100-03D13 10.6 2.2 3
1 26.1 32 32 35 30 4 1.5 14 14
3
19.7 25 25 25 25 4 1.5 14 14
400 V Drives (380 to 480 V ±10 %)
S100-02413 1.2 0.37 0.5 3 1.9 4 6 6 15 1.5 1.5 24 24
S100-02423 1.7 0.55 0.75 3 2.5 4 6 6 15 1.5 1.5 22 22
S100-02433 2.2 0.75 1 3 3.0 4 6 6 15 1.5 1.5 22 22
S100-02443 3.2 1.1 1.5 3 4.5 6 6 6 15 1.5 1.5 20 20
S100-02453 3.7 1.5 2 3 5.6 8 8 10 15 1.5 1.5 20 20
S100-02463 5.3 2.2 3 3 8.2 10 16 15 15 1.5 1.5 18 18
S100-03413 7.2 3 3 3 13.2 16 16 20 15 2.5 1.5 16 16
S100-03423 8.8 4 5 3 16.0 20 20 25 20 2.5 1.5 14 14