Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
User Menu A Commissioning
Advanced
Parameters
Diagnostics Optimization CT MODBUS RTU Technical Data
114 Installation and System Design Guide
Issue Number: 1
Figure 4-30 Removal of size 5 internal EMC filter
Remove the three M4 terminal nuts (1). Lift away the cover (2) to expose the M4 Torx internal EMC filter removal screw. Finally remove the M4 Torx
internal EMC filter removal screw (3) to electrically disconnect the internal EMC filter.
Figure 4-31 Removal of size 6 internal EMC filter
To electrically disconnect the Internal EMC filter, remove the screw (1) as highlighted above.
To Next Page
Loading...
