NE200/300 Series Drive User Manual
Appendix B: Adapted Encoder Instruction 215
The above instruction is for standard inbuilt PG card, the highest pulse
frequency NE300 series can take is 50kHz.
If higher requirement closed-loop control is needed, please order extra
professional PG card and its matched control board for NE300 series.
Appendix D NE300 advanced control PCBA
（
Option
）
NE300 advanced control PCBA diagram
303PU01 is the standard control PCBA (See fig. 3-28). Need to use
303PU02 if you want to get the close-loop, CAN etc. advanced functions.
(See fig. D-1)
Fig. D-1 NE300 advanced control PCBA diagram
Notes:
The X, Y, Z symbols are for reading, they are not printed on the PCBA
(See fig. D-1)
To Next Page
Loading...
