Nidec NE200-2S0015GB - Differential Signal PG Encoder Option

5V differential signal PG encoder option
5V differential signal encoder is the adapter between drive and the differential
encoder, can be for the closed-loop control application of synchronous and induction
motor.
1) For the closed-loop control application of synchronous motor, in the
meantime, the UVW encoder with the magnetic polarity detection can be
used while the magnetic polarity quantity is same with the synchronous
motor’s magnetic polarity quantity.
2) For the closed-loop encoder application of induction motor, the UVW
terminal can be wired while using the normal differential encoder.
Caution: Encoder’s work voltage is 5V.
Specification:
Terminal instruction:
Terminal
name
Function
Response
speed
Max.
Current
Remark
+5V, COM
Power supply
0.5A
A+ ， A-
B+ ， B-
Z+ ， Z-
A/B/Z input of the 5V
differential signal
250KHz ---
U+ ， U-
V+ ， V-
W+ ， W-
The UVW location signal
of encoder
250KHz ---
Encoder wiring:
Fig.C-2 Differential signal output encoder wiring diagram(5V)
Fig. C-3 Open collector output encoder wiring diagram(5V)