NE200/300 Series Drive User Manual
Chapter 2 Drive Installation 23
2.2 Mounting Direction and Space
In order not to reduce the drive cooling effect, the drive must be mounted
vertically, and certain space must be maintained, as shown in Fig. 2-1
Fig.2−1 Mounting direction and Space Fig.2−2 Installation diagram
Note:
When installing multiple drives vertically upside and downside, the air
deflector is required.
2.3 Removal and mounting of keypad panel and enclosure
2.3.1 Removal and mounting of operating panel.
Removal of keypad
As shown in Fig. 2-3, press the keypad buckle in direction 1 until the
buckle come out, and then lift the keypad panel in direction 2.
Mounting of keypad
As shown in Fig.2-4, push the keypad panel carefully in direction 1,
until the “crack” sound is heard.
To Next Page
Loading...
