NE200/300 Series Drive User Manual
52 Chapter 4 Operation and Display
4.1.1 Keypad button description
Table 4-1 Button description
Keys Name Function
PRG Programming key
Entry and exit of primary menu
ENTER
Confirmation key
Enter the next level menu or confirm the data
setting
∧
Increase key Increase of the value or function code
∨
Decrease key Decrease of the value or function code
>> Shift key
Select the to be displayed parameters in turn
under stop interface or running interface; Choose
the to be modified digits when setting
parameters.
RUN Running key Run the drive under keypad operation mode.
STOP
Stop/reset
Stop the drive at running status; Reset operation
in the fault alarm status. Its function is limited to
setting of code FE.02.
Knob Potentiometer
Adjust setting value when potentiometer is set up
as input. (For LED keypad)
MFK
Multi-Function
key
MFK’s function is set by FE.01(0~7). The function
is different while FE.01 is equal to the different
value. (For LCD keypad)
4.1.2 Keypad indicators
Table 4-2 Descriptions of Indicators
Symbol of Indicator
Meanings
Running
Status
RUN
Light On: Running
Light Off: Stopped
Blinking: Running at zero frequency
FWD
Light On: Running forward steadily
Light Off: Running reverse or stop
Light Blinking: Speed up or speed down forward
REV
Light On: Running reverse steadily
Light Off: Running forward or stop
Blinking: Speed up or speed down reverse
To Next Page
Loading...
