Nidec NE200-2S0015GB - F3 Vector Control Parameters

NE200/300 Series Drive User Manual
Chapter 5 List of Parameters 63
Code Description Setting range Default Modify
Modbus
Address
Enter for reverse; STOP
for stop
3: Jog
running
F2.27 Freq. resolution 0: 0.01Hz 1: 0.1Hz 0 × 031BH
F2.28
Acc./Dec. time
unit
0: 0.1s 1: 0.01s
1
②
0
③
× 031CH
F2.29
High freq.
modulation mode
0: Asynchronous
modulation
0 × 031DH
1: Synchronous
modulation
F2.31
IO output Freq.
baseline select
while vector
control
0: According to the
Freq.
after ACC/DEC speed
1: According to the
current value
0 ○ 031FH
F2.32
PWM
modulation
mode
0: uplink 16Hz discrete
modulation mode
(5-stage mode),
downlink 12Hz
continuous modulation
mode (7-stage mode)
1: fixed as z continuous
modulation mode
(7-stage mode)
0 ○ 0320H
F2.33
Threshold value
of Zero Freq.
running
0.00~550.0Hz 0.00Hz ○ 0321H
F2.34
Range between
start Freq. and
threshold value
of Zero Freq.
0.00~550.0Hz 0.00Hz ○ 0322H
Group F3: Vector Control Parameters
Code Description Setting range Default Modify
M
odbus
Address