Nidec NE200-4T0040G/0055PB - Control Board Schematic Drawing

NE200/300 Series Drive User Manual
48 Chapter 3 Wiring of Drive
The cables connecting keypad and control board use standard RJ-45
Interface, namely both sides are connected according to EIA/TIA568B
standard. Users can make the cable by themselves or purchase general
internet cable from market as keypad cable.
3.8 Control board schematic drawing
3.8.1 NE200 Control board schematic drawing
Fig.3-26 Control board schematic drawing
3.8.1.1 NE200 DIP switch setting instruction
Fig.3-27 NE200 DIP switch setting
Terminal Function Default
AI2 I: 0~20mA input; V: 0～10V input 0～10V
AO1 I: 0~20mA output; V: 0～10V output 0～10V