Nidec NE200 Series - Page 67

NE200&300 Quick Start Guide
66
Code Description Setting range Default Modify
Modbus
Address
2: All parameters aren’t
allowed read
FP.02
Parameter
initialization
0: No operation
0 × -- 1: Clear fault history
2: Restore to defaults
FP.03
Parameter
copy
0: No action
0 × --
1: Parameters download
2: Parameters
upload(except motor’s
parameters)
3: Parameters upload (all
parameters)
FP.04
Parameter
upload
protection
0: Protection enabled
0 × --
1: Protection disabled
FP.05
G/P model
selection
0: Type G 1: Type P 0 × --
FP.07
User
parameters
backup
0: Invalid 1: Valid 0 × --
FP.08
User
parameters
recovery
0: Invalid 1: Valid 0 × --