NE200/300 Series Drive User Manual
22 Chapter 2 Drive Installation
Chapter 2 Installation
2.1 Environment
Avoid installing the product in the sites with oil mist, metal powder and
dust.
Avoid installing the product in the sites with hazardous gas and liquid, and
corrosive, combustible and explosive gas.
Avoid installing the products in salty sites.
Do not install the product in the sites with direct sunlight.
Do not mount the product on the combustible materials, such as wood.
Keep the drilling scraps from falling into the inside of drive during the
installation.
Mount the product vertically in the electric control cabinet, mount the
cooling fan or air conditioner to prevent the ambient temperature from
rising to above 40 ºC.
For the sites with hash environment, it is recommended to mount the drive
heat sink outside the cabinet.
To Next Page
Loading...