NE200/300 Series Drive User Manual
216 Appendix B: Adapted Encoder Instruction
X:
Terminal for keypad
Y:
Terminal for writing the software (2 pins)
Z:
DIP switches
CN3:
Terminal for option 1
CN4:
Terminal for option 3
CN5:
Terminal for drive PCBA
CN6
：
Terminal for option 2
CN8
：
Terminal for option 4
Earthing:
Earthing point
Wiring of control circuit
Terminal sequence of control circuit
Note
：
PLC and +24V terminals are shorted by a silver-colored
metal part in factory.
Wiring of multi-function terminal
Drain connecting wiring (External power supply +24V)
Note:
Must dismantle the silver-colored metal part using to short PLC
and +24V terminal
To Next Page
Loading...