Nidec NVS-07 - Safety Precautions - Page 4; Warning and Caution Definitions; Safety Symbols; Malfunctions and Installation Safety

3
Safety precautions ...................................................................... 4
Specication - Parts List.............................................................. 6
Items included • Installation and preparation............................... 7
Before use • Display and description of indicators • Operation.... 8
Preparation for use • Operation procedure................................... 9
-
12
Display and description of indicators • Troubleshooting............... 13
Maintenance................................................................................. 14
Disposal method........................................................................... 15
INDEX
English
The NVS-07, deairing pugmill / mixer, is designed to mix and pug clay to make it suitable
for use.
• Both wet and dry clay components can be mixed and pugged in this unit.
• The auger screw speed can be adjusted to accommodate various consistencies of clay.
Also, mixing/pugging and extruding can be performed by changing the direction of the
auger screw.
• The main barrel of this pugmill/ mixer is stainless steel and is resistant to corrosion.
Porcelain clay can be used in this unit.
• The vacuum pump is used to de-air the clay while mixing and pugging.
• A safety limit switch sensor shuts o󰀨 the pugmill when the hopper cover is open.
• Both the nozzle and the auger screw are removeable for easy cleaning.
Unit description/Function description
Unit description
Function description