Nidec Shimpo RK-3D - Page 3

2
Model: RK-3D
Motor: 400W AC230V. 50Hz Single-Phase
Drive System: Direct drive DC brushless motor with electric speed control
Wheel head speed: 0
～
250rpm
Speed control: Fixed foot pedal with lever
Wheel head direction: clock wise/counter clock wise
Wheel head: Light alloy casting, diameter 300mm
Dimensions: 525(width) ×582(Length) ×515(Height)
㎜
Ship Weight: 45kg
●Specications
●Inspection/Standard Accessories
If upon delivery shipping damage is detected, do not operate the wheel. Notify the shipping carrier
immediately for damage claim instructions. Refer to product nameplate and record serial number
for future reference.
Items included with the RK-3D are:
●Instruction manual.
●Two-piece splashpan.
●Foot pedal with hand
lever and grip knob.
●T-wrench (for tightening wheelhead).
●Allen wrench for attaching foot pedal.
●Spanner for adjusting feet.
●plastic clip
After operating, before cleaning or inspection:
1. Turn ON/OFF switch to OFF
2. Unplug wheel from power source
●Do not use your wheel with any voltage other than that specied.
●Do not plug power cord into an extension cord (plug directly into an electrical wall outlet).
●Do not pull on the power cord to unplug;pull off at plug.
●Do not overload the wheelhead with more than the recommended weight of clay.
●Do not force the wheel to stop as this may damage your wheel.
●Set up the potter's wheel on a level surface. The top right foot is adjustable and will aid you to level
the wheel.
●Remove the metal cover only when adjusting the pedal stiffness. Refer all electrical repairs to a
qualied electrical technician.
This machine is built specically for use as a potter's wheel. Use for purposes
other than pottery may put you at risk of danger or harm
●Important Safety Precautions