Nidec Unidrive M200 - Menu 20: Application Menu 2

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media
Card
Onboard
PLC
Advanced
parameters
Diagnostics UL Listing
Unidrive M200 / M201 Control User Guide 125
Issue Number: 2
11.17 Menu 20: Application menu 2
Parameter
Range () Default ()
Type
OL RFC-A OL RFC-A
20.021 Application Menu 2 Read-write Long Integer 21
-2147483648 to 2147483647 0
RW Num
20.022 Application Menu 2 Read-write Long Integer 22 RW Num
20.023 Application Menu 2 Read-write Long Integer 23 RW Num
20.024 Application Menu 2 Read write Long Integer 24 RW Num
20.025 Application Menu 2 Read-write Long Integer 25 RW Num
20.026 Application Menu 2 Read-write Long Integer 26 RW Num
20.027 Application Menu 2 Read-write Long Integer 27 RW Num
20.028 Application Menu 2 Read-write Long Integer 28 RW Num
20.029 Application Menu 2 Read-write Long Integer 29 RW Num
20.030 Application Menu 2 Read-write Long Integer 30 RW Num
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination