Nidec Unidrive M200 - Menu 24: Option Module Application

Safety
information
Product
information
Mechanical
installation
Electrical
installation
Getting
started
Basic
parameters
Running the
motor
Optimization
NV Media
Card
Onboard
PLC
Advanced
parameters
Diagnostics UL Listing
128 Unidrive M200 / M201 Control User Guide
Issue Number: 2
11.20 Menu 24: Option Module Application
22.068 Parameter 00.068 Set-up 0.000 to 30.999 0.000 0.000 RW Num PT US
22.069 Parameter 00.069 Set-up 0.000 to 30.999 5.040 RW Num PT US
22.070 Parameter 00.070 Set-up 0.000 to 30.999 14.001 RW Num PT US
22.071 Parameter 00.071 Set-up 0.000 to 30.999 14.010 RW Num PT US
22.072 Parameter 00.072 Set-up 0.000 to 30.999 14.011 RW Num PT US
22.073 Parameter 00.073 Set-up 0.000 to 30.999 14.006 RW Num PT US
22.074 Parameter 00.074 Set-up 0.000 to 30.999 14.013 RW Num PT US
22.075 Parameter 00.075 Set-up 0.000 to 30.999 14.014 RW Num PT US
22.076 Parameter 00.076 Set-up 0.000 to 30.999 10.037 RW Num PT US
22.077 Parameter 00.077 Set-up 0.000 to 30.999 11.032 RW Num PT US
22.078 Parameter 00.078 Set-up 0.000 to 30.999 11.029 RW Num PT US
22.079 Parameter 00.079 Set-up 0.000 to 30.999 11.031 RW Num PT US
22.080 Parameter 00.080 Set-up 0.000 to 30.999 0.000 RW Num PT US
Parameter
Range() Default()
Type
OL RFC-A OL RFC-A
RW Read / Write RO Read only Num Number parameter Bit Bit parameter Txt Text string Bin Binary parameter FI Filtered
ND No default value NC Not copied PT Protected parameter RA Rating dependent US User save PS Power-down save DE Destination