Nidec Unidrive M700 - Page 118

118 SI-Ethernet User Guide
Issue: 3
S.21.028 Input mapping parameter 28
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.21.029 Input mapping parameter 29
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.21.030 Input mapping parameter 30
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.21.031 Input mapping parameter 31
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU