Nidec Unidrive M700 - Page 97

SI-Ethernet User Guide 97
Issue: 3
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started
Parameters
Key features
and Protocols
PC Tools
Applications
Security Diagnostics
Glossary of
terms
Index
This parameter specifies an IP address for priority connection 2.
This parameter specifies an IP address for priority connection 3.
This parameter specifies an IP address for priority connection 4.
S.15.021 Priority Connection 2
Minimum
0
(Display: 0.0.0.0)
Maximum
4294967295
(Display: 255.255.255.255)
Default
0
(Display: 0.0.0.0)
Units None
Type 32 Bit User Save Update Rate
Module reset, Modbus
interface reset or Modbus
interface enable
Display Format IP Address Decimal Places 0
Coding RW, BU
S.15.022 Priority Connection 3
Minimum
0
(Display: 0.0.0.0)
Maximum
4294967295
(Display: 255.255.255.255)
Default
0
(Display: 0.0.0.0)
Units None
Type 32 Bit User Save Update Rate
Module reset, Modbus
interface reset or Modbus
interface enable
Display Format IP Address Decimal Places 0
Coding RW, BU
S.15.023 Priority Connection 4
Minimum
0
(Display: 0.0.0.0)
Maximum
4294967295
(Display: 255.255.255.255)
Default
0
(Display: 0.0.0.0)
Units None
Type 32 Bit User Save Update Rate
Module reset, Modbus
interface reset or Modbus
interface enable
Display Format IP Address Decimal Places 0
Coding RW, BU