Do you have a question about the Nietz NZ2000 Series and is the answer not in the manual?
Details the technical specifications and capabilities of the NZ2000 series inverter.
Explains the information presented on the inverter's nameplate.
Provides a guide for selecting the appropriate inverter model based on requirements.
Specifies conditions for installing the inverter safely and effectively.
Details the dimensions required for the keyboard cutout panel.
Covers wiring, terminals, precautions, and component specifications.
Explains the digital operator panel, its keys, and functions.
Covers operational sequences, parameter settings, fault reset, and motor auto-tuning.
Details fundamental parameters like G/P type and control mode selection.
Covers parameters related to starting, stopping, and speed tracking.
Focuses on parameters related to motor configuration and auto-tuning.
Details parameters specific to vector control mode operations.
Lists common faults, their causes, and solutions for the inverter.
Provides a troubleshooting table for common AC drive faults.
Outlines periodic inspection procedures for the inverter to ensure performance.
Details regular maintenance checks for smooth and long-term operation.
Specifies replacement intervals for worn components like fans and capacitors.
Provides information on the inverter's warranty period and terms.
Lists and describes essential peripheral devices for inverter setup and operation.
Details specifications for braking resistors and related units.
Lists and explains basic function parameters for the inverter.
Lists parameters for controlling inverter start and stop operations.
Lists parameters for configuring motor properties and auto-tuning.
Covers agreement content, application methods, and bus structure.
Explains the Modbus protocol, data format, and frame structure.
| Rated Power | 2000W |
|---|---|
| Output Voltage | 220V AC |
| Frequency | 50Hz / 60Hz |
| Protection Features | Overload Protection, Short Circuit Protection, Over Voltage Protection |
| Cooling Method | Fan Cooling |