Nikon COOLPIX 4300 - Camera Operation Modes; The Mode Dial Explained

VAA12901-R.3594.A
- D4
･
E4300 -
• Remove the 3 pieces of the screws ① (M1.7×4).
• Remove the nder unit while carefully removing the lens unit.
LENS UNIT
• Disconnect the FPC ① from the connector.
• Remove the 2 pieces of the screws ② (M1.7×6) to
remove the lens assemble.
• Remove the soldering bridge of the CCD and
screw ③ (M1.7×2.5)to remove the CCD from
the CA-1 PCB.
FPC ①
CA-1 PCB
②
③
FINDER UNIT
①
Finder unit
Lens unit