118
Connecting the Camera to a TV, Printer, or Computer
Transferring Images to a Computer (ViewNX-i)
2 After Nikon Transfer 2 starts, click Start Transfer.
• Image transfer begins. When image transfer is complete, ViewNX-i starts and the
transferred images are displayed.
3 Terminate the connection.
• If you are using a card reader or card slot, choose the appropriate option in the
computer operating system to eject the removable disk corresponding to the
memory card and then remove the memory card from the card reader or card slot.
• If the camera is connected to the computer, turn the camera off and disconnect the
USB cable.
C Capture NX-D
Use Nikon’s Capture NX-D software to fine-tune photos or to change settings for RAW
pictures and save them in other formats. It is available for download from the following
website:
https://downloadcenter.nikonimglib.com
To Next Page
Loading...
