35
Shooting Features
Scene Mode (Shooting Suited to the Shooting Conditions)
y M e Night portrait
• Raise the flash before shooting.
• On the screen displayed when e Night portrait is selected, select u Hand-held or
w Tripod.
• u Hand-held:
-While the e icon on the shooting screen is displayed in green, press the shutter-
release button all the way to capture a series of images which are combined into a
single image and saved.
-While the e icon on the shooting screen is displayed in white, press the shutter-
release button all the way to capture one image.
- Once the shutter-release button is pressed all the way, hold the camera still until a still
image is displayed. After taking a picture, do not turn the camera off before the screen
switches to the shooting screen.
- If the subject moves while the camera is shooting continuously, the image may be
distorted, overlapped, or blurred.
- The angle of view (i.e., the area visible in the frame) seen in the saved image is
narrower than that seen on the shooting screen.
- Continuous shooting may not be possible in certain shooting conditions.
• w Tripod:
- One image is captured at a slow shutter speed when the shutter-release button is
pressed all the way.
- Vibration reduction is disabled regardless of the Photo VR setting (A168) in the
setup menu.
y M f Party/indoor
• To avoid the effects of camera shake, hold the camera steady. Set Photo VR (A168) to
Off in the setup menu when using a tripod to stabilize the camera during shooting.
To Next Page
Loading...
