11
Getting Started
Wireless Networks
B Where the Use of Wireless Devices Is Prohibited
Where the use of wireless devices is prohibited, disable wireless features in the camera
network menu by selecting On for Airplane mode. This will temporarily interrupt the
constant connection with the smart device, but the connection is automatically re-
established when airplane mode is turned off.
Other Options for the SnapBridge App
• See SnapBridge app online help for more information.
Option Description
Pairing
To pair the camera with a smart device (for example, with a
new device or if you did not opt to pair with a smart device
during setup), select Connect to smart device in the
camera network menu and follow the instructions on page 7,
starting with Step 3.
The camera can be paired with up to five smart devices, but
can connect to only one at a time.
Uploading pictures via
Wi-Fi
A Wi-Fi connection is recommended for large-volume
uploads.
Follow the on-screen instructions in the SnapBridge app to
switch to a Wi-Fi connection.
• The Wi-Fi > Network settings item in the camera
network menu contains Auth./encryp. and Password
options. The default option for Auth./encryp. is WPA2-
PSK-AES.
Option Description
Remote photography
Use the smart device to release the camera shutter. Before
performing remote photography, turn the camera on.
Viewing the pictures on
the camera
Use the smart device to view and download the pictures on
the camera. This option is available even when the camera is
off.
To Next Page
Loading...
