Nikon COOLPIX AW100 - Create Log (Record the Log of Moving Information)

E61
Map Menu
Reference Section
Create Log (Record the log of moving information)
When log recording starts, the measured tracking information for a certain
duration is recorded until a preset time has elapsed. To display the log data
(E63), save it to a memory card.
1 Use the multi selector to select Start log, and
press the k button.
2 Select the duration that the log will be
recorded, and press the k button.
• Log recording starts.
• The log data is recorded every minute until the preset
time is reached.
• D is displayed on the screen during log recording.
3 When log recording is completed, select End
log in Create log in the map menu, and press
the k button.
Display a map (A88) M d button M U tab (A11) M Create log
Create log
Start log
End log
Log data for next 72 hours
Log data for next 24 hours
Log data for next 6 hours
Start log
Log data for next 12 hours
500km
Create log
Start log
End log