—Frame a Picture
Use the zoom button to frame the subject near the center of the monitor.
The zoom button
Press to zoom in on the subject so that it fi lls
a larger area of the frame. Press
to zoom out,
increasing the area visible in the frame.
1 Lightly press the shutter-release button about
halfway, stopping when you feel resistance.
The camera will set focus and exposure for the
subject closest to the camera. Focus and ex-
posure remain locked while the shutter-release
button is pressed halfway.
With the shutter-release button pressed half-
way, check the focus indicator and fl ash lamp:
Focus indicator
On (green) Subject in focus.
Blinks red
Camera unable to focus.
Change composition and
try again.
Flash lamp
On Flash will fi re when picture is taken.
Blinks Flash charging.
Off Flash off or not required.
To Next Page
Loading...
