Nikon COOLPIX L101 - Page 5

5
First Steps
Step
Step
4
4
—Turn the Camera On
—Turn the Camera On
4
4
.
.
2
2 Press the power switch to turn the camera on.
4
4
.
.
1
1 Slide the mode selector to .
Auto off (Stand-by Mode)
Auto off (Stand-by Mode)
If no operations are performed for about a minute, the monitor will turn off to save
power. The power-on lamp will blink, and the display can be reactivated by press-
ing the shutter-release button. If no operations are performed for a further three
minutes, the camera will turn off automatically.