39
One-Touch Portrait Mode
One-Touch Portrait Mode
Taking Pictures in the One-Touch Portrait Mode
For portrait shots, press A when the camera is in the auto mode, scene
mode, movie mode and anti-shake mode. The following features are auto-
matically activated:
• Portrait: Portrait subjects stand out clearly.
• Face-priority AF: The camera automatically detects and focuses on faces.
• Auto red-eye reduction: Reduces “red-eye” caused by the flash (c 24).
Macro close-up is not available in one-touch portrait mode.
Press A again to return to the shooting mode selected in the shooting-
mode selection menu.
1 Press A.
•The K guide is displayed.
2 Frame a picture using the K guide.
• When the camera detects a face, the guide is dis-
played with a double yellow border.
• When the camera detects more than one face, the
closest face is framed by a double border and the
rest by a single border. The camera focuses on the
face framed by the double border and adjusts
exposure accordingly. If the camera loses its ability
to detect a face (for example, because the subject
has looked away from the camera), borders are no
longer displayed and monitor display returns to
that shown in step 1.
3 Press the shutter-release button
halfway.
• Focus and exposure are set, and the dou-
ble border turns green.
4 Press the shutter-release button the rest
of the way down to take a picture.
ON/
To Next Page
Loading...
